How to use the PC tool to update software

1.start the machine.
2.Press POWER_KEY by remote control,then it will enter standby mode.
3.open the update tool, select the first item(Download Main S/W),then select the file that downloaded,then press start .
4.When finish, the LED  will display "-End",then restart the machine.

How to update receiver to receiver?

1) Prepare a twisted RS232C cable.
2) Connect the master receiver and the slave receiver with twisted RS-232C cable.
3) Turn on the master receiver and press "POWER" key to make it standby
4) Turn on the slave receiver,then the LED of master receiver will display 'H'.
5) Input digit number on master receiver to update different parts:
	 111---- Update software.
	 222---- Update data.
	 333---- Update data,then software.
	 444---- All flash except boot loader. 	
6) When finish, the LED  will display "-End"

How to enable/disable patch and How to enter RS232 Mode

1.Exit all menus.
2.press Info-Key by remote control.
3.Input diferent number:
         0------Manual Current Key.
         1------All Provide ID.
         9------RS232 Mode.



